Overtrousers blog

How to stop overtrousers wetting out

Soggy, dark patches on the knees and seat usually mean the water repellent finish has given up, not the membrane. Here is how to fix it and keep it fixed.

You are halfway round a walk in steady rain and the fronts of your thighs go dark and heavy. Your knees feel cold and damp. It is natural to assume the overtrousers have started leaking, but most of the time they have not. The outer fabric has "wetted out", and that is usually fixable at home. This post explains what is happening, how to tell it apart from a leak or condensation, and how to stop it coming back so quickly.

What wetting out actually is

Waterproof-breathable overtrousers have two jobs split between two parts. A membrane or coating on the inside keeps liquid water out. A durable water repellent (DWR) finish on the outer face makes rain bead up and roll off, so the face fabric stays dry.

When the DWR wears off or gets clogged with dirt, rain soaks into the face fabric instead of rolling off. The membrane underneath may still be keeping water out, but now you have a layer of cold, wet fabric wrapped round your legs. It chills you, and because water vapour cannot easily escape through a soaked outer layer, your own sweat condenses on the inside. The result feels just like a leak. The care & reproofing guide has a diagram of the difference.

Wetting out, leak or condensation?

Before you fix anything, work out which problem you have.

SignLikely cause
Outside goes dark and soggy over large areas, especially knees, seat and thighs; inside feels damp and cold all overWetting out
Damp inside, but the outside is still beading water; worse after hard effortCondensation from sweat
One specific wet patch or line inside, in the same place each timeA real leak: seam tape, a hole, a worn-through area or a zip
Wet at the ankles and lower shins onlyWater getting in at the cuff, or trousers too short or tucked into boots

A simple test at home: sprinkle water on the knees and seat of clean, dry trousers. If it beads and rolls off, the DWR is working. If it spreads and darkens the fabric, the DWR needs attention.

Step 1: wash them

This surprises people, but dirt is the main reason DWR stops working. Mud, body oils, sun cream, chain oil and road grime all stop the finish doing its job, and washing often restores a surprising amount of performance by itself.

  • Read the care label first; it overrides general advice.
  • Close all zips and poppers and loosen drawcords.
  • Use a technical cleaner made for waterproof clothing, or a small amount of mild non-bio liquid if the maker allows it.
  • Never use fabric softener. Clean out the detergent drawer if it has softener residue in it.
  • Wash at the temperature on the label and add an extra rinse.

Technical cleaners for waterproof clothing are designed to rinse out cleanly without leaving residue that attracts water.

Step 2: gentle heat, if the label allows

Many DWR finishes recover after gentle heat. If the care label permits it, tumble dry on low or iron on a low setting with a cloth between the iron and the fabric. Then do the sprinkle test again. If water beads, you are done for now. If the label says no tumble drying, line dry and move on to reproofing if needed. Never put PVC or PU coated trousers near high heat.

Step 3: reproof

If water still soaks in after washing and heat, the DWR has worn away and needs replacing. There are two main types of reproofer:

  • Spray-on, applied to the outside of clean, damp trousers. You can target the areas that wear fastest (seat, knees, inner legs and lower shins) and the inside stays untreated. Generally the better choice for breathable trousers.
  • Wash-in, added in a second wash cycle. Even coverage and very easy, but it treats the inside as well, which some makers say can slightly reduce the breathability of lined trousers.

If your trousers have a PFC-free finish, use a PFC-free reproofer. Follow the reproofer's own instructions on drying and heat.

Keeping it working for longer

Once water is beading again, a few habits slow down how fast it wears off:

  • Wash more often, not less. A light clean every few weeks of heavy use does more good than one deep clean a year.
  • Rinse off mud before it dries in, especially salty road spray in winter.
  • Avoid sitting on rough, wet rock or concrete when you can; abrasion strips DWR fastest at the seat.
  • Keep sun cream and insect repellent off the fabric where possible, as oils and solvents degrade the finish.
  • Store them dry and loose, not compressed in a stuff sack for months.
  • Reproof before a big trip rather than discovering mid-walk that the DWR is gone.

PFC-free finishes in particular are more easily defeated by oil and dirt, so they reward regular washing.

When it really is a leak

If the wet patch is always in the same place, look closely at that spot. Small holes can be patched with a repair patch made for waterproof fabric, rounded at the corners so it does not peel. Fabric repair tape is worth keeping in a kit bag. Lifting seam tape can sometimes be re-bonded with a seam sealer, and larger failures are a job for a specialist repairer. If the seat or knees have worn through completely, it may be time for a tougher pair; the buying guide explains how fabric construction affects durability.

Wet ankles?

Water at the ankles is often a fit problem rather than a fabric one. Overtrousers should sit over your boots, not tucked in, and cover the top of the boot when you bend your knee. Check yours against the sizing & fit guide.